Product Description
The control of pH is essential in many different type of aquatic systems. The most common use of pH control is to counteract the acidity produced by the process of nitrification in recirculation systems. Without pH control in such systems, the pH would rapidly fall to a level that is toxic to the animals, as well as the bacteria in the biological filter (Aquatext Dictionary: pH Control). In order to raise the pH and maintain it at an optimal level, the AquaDose System can be programmed to dose sodium bicarbonate into the system as needed.
Conductivity is the ability to conduct electricity, i.e. the measure of salinity and minerals in the water. Because variations in salinity can cause stress and mortality in aquatic animals, it is important to maintain a stable level in the system water, especially when a system is supplied with reverse osmosis water. |
|
 |
DADS15
Chem Feed Dosing Stacked Barrels and Pumps |
|
|
|
Product Information
The AquaDose System includes pH and conductivity transmitters, pH and conductivity probes, dosing pumps, and dosing tanks. On a Stand Alone System, the AquaDose is mounted onto the rack; on a Central Filtration System, it rests on a stainless steel stand.
- The pH and conductivity (salinity) transmitters monitor the levels of pH and conductivity in an aquatic system via the two probes. As soon as the unit recognizes a divergence from the pre-programmed pH or conductivity levels, it will automatically pump the necessary chemicals into the aquatic system in order to maintain these levels.
- The dosing pumps are electronic metering pumps that administer a metered amount of control solution as directed by the transmitters.
|
|
 |
|
 |
|
DAD15
Chem Feed Dosing Barrels and Pumps |
|
DD03
Rack Mounted Chem Feed Dosing and Control |
|
|
|
|
|
 |
|
 |
|
MCCFD10
Chem Feed/Dosing Pump |
|
(top to bottom) pH probe; conductivity probe |
|
|
|
|
|
Dosing and Control |
|
|
|
DD03 |
Chem Feed Dosing & Control
For pH and Conductivity with Controllers, Pumps, (2) 3 Gallon Tanks. Rack or Storage Tank Mounted
(up to 4 racks) |
|
|
DD05 |
Chem Feed Dosing & Control
For pH and Conductivity with Controllers, Pumps, (2) 5 Gallon Tanks. Rack or Storage Tank Mounted
(3 - 8 racks) |
|
|
DD15 |
Chem Feed Dosing & Control
For pH and Conductivity with Controllers, Pumps, (2) 15 Gallon Barrels and Stainless Steel Stand.
(12 - 24 racks) |
|
|
DD30 |
Chem Feed Dosing & Control
For pH and Conductivity with Controllers, Pumps, (2) 30 Gallon Barrels and Stainless Steel Stand.
(25 - 50 racks) |
|
|
|
|
|
|
Stacked Dosing and Control |
|
|
DDS05 |
Chem Feed Dosing & Control
For pH and Conductivity with Controllers, Pumps, (2) 5 Gallon Stacked Barrels and Stainless Steel Stand
(3 - 8 racks) |
|
|
DDS15 |
Chem Feed Dosing & Control
For pH and Conductivity with Controllers, Pumps, (2) 15 Gallon Stacked Barrels and Stainless Steel Stand
(12 - 24 racks) |
|
|
|
|
|
|
Barrels and Pumps |
|
|
|
DAD03 |
Chem Feed Dosing Tanks & Pumps For pH and Conductivity with (2) 3 Gallon Tanks (Requires Controllers) |
|
|
DAD05 |
Chem Feed Dosing Barrels & Pumps For pH and Conductivity with (2) 5 Gallon Barrels (Requires Controllers) |
|
|
DAD15 |
Chem Feed Dosing Barrels & Pumps For pH and Conductivity with (2) 15 Gallon Barrels (Requires Controllers) |
|
|
DAD30 |
Chem Feed Dosing Barrels & Pumps For pH and Conductivity with (2) 30 Gallon Barrels (Requires Controllers) |
|
|
|
|
|
|
Barrel and Pump (Single) |
|
|
|
DAS05 |
Chem Feed Dosing Barrel & Pump for pH and Conductivity with (1) 5 Gallon Barrel (Requires Controllers) |
|
|
DAS15 |
Chem Feed Dosing Barrel & Pump For pH and Conductivity with (1) 15 Gallon Barrel (Requires Controllers) |
|
|
DAS30 |
Chem Feed Dosing Barrel & Pump For pH and Conductivity with (1) 30 Gallon Barrel (Requires Controllers) |
|
|
|
|
|
|
Stacked Barrels and Pumps |
|
|
DADS05 |
Chem Feed Dosing Stacked Barrels & Pumps For pH and Conductivity with (2) 5 Gallon Barrels (Requires Controllers) |
|
|
DADS15
|
Chem Feed Dosing Stacked Barrels & Pumps For pH and Conductivity with (2) 15 Gallon Barrels (Requires Controllers) |
|
|
DADS30
|
Chem Feed Dosing Stacked Barrels & Pumps For pH and Conductivity with (2) 30 Gallon Barrels (Requires Controllers) |
|
|
|
|
|
|
Controllers |
|
|
|
MCApHCond |
Complete Control Assembly: Controller (for pH and Conductivity) including Probes, NEMA 4 Enclosure, Wiring
(To dose pH and Salinity, requires pumps & barrels) |
|
|
MCApHCond-S |
Complete Control Assembly for Seawater: Controller (for pH and Conductivity - Seawater Ranges 100us to 200,000us) including Probe, NEMA 4 Enclosure, Wiring
(To dose pH and Salinity, requires pumps & barrels) |
|
|
MCpHCond
|
Universal Controller for pH or Conductivity (3-9900-1P) |
|
|
|
|
|
|
Electrodes |
|
|
|
MCEPH-2724 |
pH Electrode, Black (Dry Lock) |
|
|
MCECOND |
Conductivity Electrode |
|
|
|
|
|
|
Chemical Feed Pumps |
|
|
|
MCCFD10 |
Pump: Chem Feed |
|
|
MCCFD10EU |
Pump: Chem Feed, 230V |
|